skip to main text

Maintenance Procedure

If print results are blurred, colors are not printed correctly, or print results are unsatisfactory (e.g. misaligned printed ruled lines), perform the maintenance procedure below.

Important

  • Do not rinse or wipe the print head. This can cause print head (cartridge) problems.

Note

When the Print Results Are Blurred or Uneven:

  1. Step1 Print the nozzle check pattern.

    From the printer

    From the computer

  2. Step2 Examine the nozzle check pattern.

  3. If there are missing lines or horizontal white streaks in the pattern:

  4. Step3 Clean the print head.

    From the printer

    From the computer

    After cleaning the print head, print and examine the nozzle check pattern: Step1

  5. If the problem is not resolved after performing from step 1 to step 3 twice:

  6. Step4 Clean the print head deeply.

    From the computer

Note

  • If problem is not resolved after performing print head deep cleaning, perform system cleaning from a computer.

    If the problem is still not resolved, the print head may be damaged. Contact the service center.

When the Print Results Are Not Even such as the Ruled Lines Are Misaligned:

  1. Step Align the print head.

    From the computer